Water Treatment Medicament Manufacturer
There are more valuable substances in the world but water is without a doubt the most imoportant of all the resources on the planet. 71 percent of the Earth’s surface is covered in water yet freshwater only makes up 3 percent of that total. Some freshwater sources are pure enough to be utilized directly from the source but the vast majorty of water must be treated to be safely used ans consumed.
AG Greentech is a specially designed to purify water, making is suitable for drinking. As an organic polymer, PAC can be used as a sewage treatment chemical chloride and an industrial warer treatment chemical for solid-liquid separation. We are delicated to protecting our freshwater sources and produce around 50,000 tons of waste treatment chemicals each year.
Anionic Polyacrylamide
Anionic polyarylamide (APAM) is a kind of water – soluble polymer. It is mainly used for the flocculation, sedimentation and clarification of industrial wastewater in carious industries such as the steelwords, electroplate factories, metallurgy, coal washing, sludge, and so on. Also, it can be used for the drinking water purification and clarification purposes.
Anionic polyacrylamide allows particles to be aggregated by absorbing the suspended solids in water, because its molecular chain contains a certain amount of polar group. It can speed up the sedimentation of particles in suspended liquid . In addition, this kind of water treatment chemicals can obviously accelerate the clarification of solution, and also facilitate filtration.
Characteristics
1. With superb water solubility, the anionic polyacrylamide can be completely dissolved in cold water.
2. A small amount of APAM can achieve great flocculation effect. In most case, addition of 0.01 – 10 g/m3 is needed to bring into full play.
3. A combination of anionic polyacrylamide and inorganic flocculants (such as polyferric sulfate, polyaluminium chloride, ferric safl, and more) can present a superb effect.
Technical Parameters of Anionic Polyacrylamide
| PAM | Molecular Weight | Degree of Ion | Water Insoluble | Purity % | Dissolution Time | Residual Monomers |
| Anion | 3 – 25 | 10-90% | ≤0.5% | ≥90% | ≤1.5hrs | ≤ 0.05% |
Package: Two – layer PE bag, or in two – layer bag with PE inside and PP ( or kraft) outside
Both 20kg/bag and 25 kg/bag are available.
|
Product Name |
Model |
Appearance |
Solid Content (%) |
Molecular Weight (Million) |
Hydrolysis Degree (%) |
pH value |
Dissolving Time (min) |
Technical document |
|
Anionic polyacrylamide |
A2718 |
White granule/emulsion |
≥89% |
18 – 20 |
25 – 29 |
4 – 8 |
≤ 60 |
Link COA |
| A2320 |
White granule/emulsion |
≥89% |
20 – 27 |
23 – 25 |
4 – 8 |
≤ 60 |
Link COA | |
| A2327 |
White granule/emulsion |
≥89% |
27 – 28 |
23 – 25 |
4 – 9 |
≤ 60 |
Link COA | |
| A2015 |
White granule/emulsion |
≥89% |
15 – 16 |
20 |
4 – 9 |
≤ 60 |
Link COA | |
|
Nonionic polyacrylamide |
N0510 |
White granule/emulsion |
≥89% |
9 – 11 |
≤5 |
4 – 7 |
≤ 60 |
Link COA |
Cationic Polyacrylamide
1. Cationic polyacrylamide is a linear polymer that can be abbreviated as CPAM. With many active groups, it has a high affinity for numberous substances to form hydrogen bond.
2. Cationic polyacrylamide is mainly used as cationic flocculants to flocculate the negatively charged colloids. It gives multiple functions such as turbidiry removal, decoloring, absorption, adhesion, and more.
3. As a popular selection of wastewater treatment chemicals, cationic polyacrylamide is ideal for the treatment of wastewater with high content of organic colloids in different industries such as the dyeing, papermaking, food, construction, metallrgy, ore dressing, pulverized coal, oilfield, fermentation, and the aquatic products processing, etc.
4. Cationic polyacrylamide is especially suitable for the dehydration of municipal sewage, municipal sludge, papermaking sludge, and other industrial sludge.
Eeatures
1. The cationic polycrylamide can be entirely dissolve in cold water due to high water solubility.
2. Low doses of CPAM provide a huge flocculation effect.
3. This water treatment product can be used together with polyferric sulfate, polyaliminium chloride, ferric salts, and other substances, which can offer a significant effect.
Technical Parameters
| PAM | Molecular Weight | Degree of Ion | Water Insoluble | Purity % | Dissolution Time | Residual Monomers |
| Cation | 2-12 | 10-60% | ≤0.5% | ≥90% | ≤1.5hrs | ≤ 0.05% |
Package
Two – layer PE bag, or in two – layer bag with PE inside and PP ourside
Both 20kg/ bag and 25kg/bag are available.
|
Product Name |
Model |
Appearance |
Solid Content (%) |
Molecular Weight (Million) |
Degree of Ion |
pH Value |
Dissolving Time (min) |
Technical document |
| Cationic poly
acrylamide |
C0510 |
White granule/emulsion |
≥89% |
9 – 11 |
5 |
6 – 8 |
≤ 60 |
Link COA |
|
C1514/C1312 |
White granule/emulsion |
≥89% |
12 -15 |
15 |
6 – 8 |
≤ 60 |
Link COA | |
|
C2012 |
White granule/emulsion |
≥89% |
10 – 12 |
20 |
6 – 8 |
≤ 60 |
Link COA | |
|
C3006/C4306 |
White granule/emulsion |
≥89% |
6 – 8 |
30 |
6 – 8 |
≤ 60 |
Link COA | |
|
C3012 |
White granule/emulsion |
≥89% |
10 – 12 |
30 |
6 – 8 |
≤ 60 |
Link COA | |
|
C4008 |
White granule/emulsion |
≥89% |
6 – 8 |
40 |
6 – 8 |
≤ 60 |
Link COA | |
|
C5008 |
White granule/emulsion |
≥89% |
6 – 8 |
50 |
6 – 8 |
≤ 60 |
Link COA |
Thương hiệu liên quan
